Imada Cedar NTS-6-S50 Rotating Torque Tester, Range 0.30 - 45.00 lb-in / 0.030 - 5.000 N-m

Price: $ 4,950.00

Imada Cedar NTS-6 Rotating Torque Analyzer
Cedar NTS-6 Motorized Rotating Torque Analyzer
9 Ranges up to 45.00 lb-in

NTS-6 is a motorized rotating torque tester that measures rotating dynamic torque while turning the sample.

Check the rotating torque, smoothness of rotation and components of small precision motors, such as, gearbox, bearings, oil seals, etc.

Torque data can be continuously output via RS-232 enabling you to display a torque profile using data acquisition software.


  • Peak, Real Time and Continuous Output measuring modes (selectable)
  • Programmable high/low setpoints for Go/No go testing
  • RS-232C output in Both CW and CCW operation

Force Ranges

NTS-6-S10.030 - 0.900 lb-in
NTS-6-S20.030 - 1.740 lb-in
NTS-6-S50.30 - 4.50 lb-in
NTS-6-S100.30 - 9.00 lb-in
NTS-S200.30 - 17.40 lb-in
NTS-S500.30 - 45.00 lb-in
NTS-S1oz0.30 - 14.00 oz-in
NTS-S2oz0.30 - 28.00 oz-in
NTS-S5oz3.00 - 70.00 oz-in

The available engineering units of measurement on the NTS-6 Rotating Torque Testers are oz-in, lb-in, N-m, N-cm and Kgf-cm.


Accuracy1% F.S., 1LSD
Measuring Range
(at the time of Track)
S1/oz: 3.0~100mNm
S2/oz: 3.0~200mNm
S5/oz: 0.030~0.5Nm
Max. Rotational
S1/oz: 85 rpm
S2/oz: 30 rpm
S5/oz: 13 rpm
S10: 18 rpm
S20: 18 rpm
S50: 5 rpm
Display4 digit LCD display
OperationBoth CW and CCW motorized rotation
Measuring modesPP: Peak Mode displays PEAK torque value that will not change until a higher value is measured.
GO: Real Time Mode displays TRANSIENT torque values.
RG: Output Torque Data every 1/100 seconds.
Measurement start timeCan be set up to 1 second in 0.1 second increments.
Measuring timeTime can be programmed between 1 and 20 seconds.
Go/No go testingProgrammable High and Low values; Green lamp (OK solid, NG blinking).
External input/outputSignal output (open collector): Go and No Go
Data output: RS-232C (9600 baud) External start switch input
Data memory400 data
Power supplyAC100V~240V
Bit size4mm diameter

lineBuy Nowline

Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
Imada Cedar NTS-6-S50 Rotating Torque Tester, Range 0.30 - 45.00 lb-in / 0.030 - 5.000 N-m $4,950.00



Powered by Marctin Web Architecture