Mark-10 F1505S-EM Test frame, Short Column with EasyMESUR® control panel, vertical, 1,500 lbF / 6.7 kN

Load Cell and Grips Sold Separately

Series F test frames with EasyMESUR are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.

Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESURs serial command library.

Sample setup and fine positioning are a breeze with available FollowMe force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

Engineered around a modular function platform, the EasyMESUR run screen can be arranged with large, simple controls or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.

Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.

Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.

Kit Contents

• Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range
• Control panel, mounting bracket, and hardware
• Eye end kit for base
• 2 Lock ring for eye end
• 2 Spanner wrench
• Power cord
• Allen wrench set
  

Click image to enlarge

Features

• 3 Year Warranty
• Easy-To-Use Touch Screen Controller
• Adjustable upper and lower solid state limit switches
• Easy-to-service electronics
• Position accuracy of 0.006 in / 0.15 mm under any load, at any position
• Smooth, quiet operation, with virtually no speed variation under load
• The EasyMESUR integrated control panel centralizes test setup, test frame control, and data collection into one convenient place

Specifications

• Load capacity is reduced at higher speeds, as follows:
  • F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
  • F505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min

EasyMESUR

The EasyMESUR integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7 touchscreen to create and run a wide range of tests, including:

View data in graphical format or results tables. Save or export data as needed, or generate a report.

What's your point of view

Run a test via the Standard, Graph, or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples.

Standard View	Graph View	Results View
View large-format load and distance values, with pass/fail status. Optional functions shown here: Distance Measurement	View a graph of load vs. distance or time, with pass/fail status. Optional functions shown here: Distance Measurement, Graphing & Reporting	View results for each run, with corresponding statistics for the results. Optional functions shown here: Distance Measurement, Graphing & Reporting

Basic tests

Select a test type, and EasyMESURwill guide you through the setup.

Load Limit	Distance Limit	Break Limit	Load Hold	Cycle	Averaging

Basic Test Settings Test direction Speed Test-specific parameters Data save preferences	Results Settings Select results Enable and configure pass/fail limits Set data collection rate Set auto-return to home	Graph Settings Single-point vs. continuous graphing Set force vs. time or vs. distance Graphing start threshold

Robust data acquisition and management

Blazingly fast Force sensor sampling rate of 5,000 Hz yields accurate peak measurements even in quick-duration events. EasyMESUR collects load and travel data at up to 100 Hz, and allows up to 100,000 data points per run. Standard reporting Save a single result per run, such as maximum load to a USB flash drive or internal storage. Save results as an EasyMESUR file for later viewing or export to a .csv file. Each run includes the run number, pass/fail status, and result, such as a maximum compression load.

With the Graphing & Reporting function

• View and save all data points collected during a run, including reading number, load, elapsed time, and distance (Distance Measurement function required).
• View statistics for the results.
• View a graph of load vs. time or load vs. distance (Distance Measurement function required).
• Create and save a report, including results and graph. Save report templates for future use.

Manually control the test frame to obtain quick force and distance results, or manually position the crosshead prior to a test. Select from several actuation methods, including momentary (button-hold), maintained (button release) motion, jog mode with three distance presets, and FollowMe force-based positioning.

Push and pull on the force sensor to move the crosshead. Apply greater load to achieve faster motion.FollowMeis responsive enough for quick positioning as well as fine adjustments. FollowMeoptional function required.

Calibrate force sensors on the test frame or off-site

Calibrate force sensors in one of two ways:

Test frame EasyMESUR provides an integrated utility, with an intuitive step-by-step wizard. Manual controls allow the technician to use the test frame to apply tension and compression forces.

Off-site Conveniently remove the force sensors for off-site calibration with a Mark-10 Model M7I or M5I indicator (requires optional AC1083 adapter).

Control user access to sensitive areas, such as test editing and calibration, via password.

Related Products

Mark-10 Series FS05 Tension and Compression Force Sensors

• Capacities up to 500 lb / 2.5 kN

Click image for more info

Mark-10 Series FS06 Tension and Compression Force Sensors

• Compatible with Model F105, F305, F505, and F505H test frames

Click image for more info

Mark-10 Series R07 S-Beam Force Sensor

• Compatible with Models F755, F755S, F1505, and F1505S test frames

Click image for more info

Mark-10 AC1092 Shields for Test Frames and Test Stands

• Rugged construction of frame and shield

Click image for more info

Downloads

Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Data Sheet

Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Instruction Manual

Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Comparison Chart