|
|
Imada DIR-IP200 Digital Torque Tester with Remote Sensor 145 lbf-ft, 200 Nm - 1/2" Drive
Price: $ 1,974.00
7 Ranges up to 2.0~362.0 lbf-ft / 0.20~50.00 kgf-m / 2.0~500.0 N-m
800 data memory for recall or for SPC download
The Imada DIR-IP Digital Torque Tester, equipped with a flanged remote sensor, is designed for calibrating non-impact torque tools, capable of up to 362 lbf-ft / 500 Nm.
Use the 800 internal memory for peak data recall or USB download for analysis with SW-1SV-USB data acquisition software (optional).  Calibrate your own torque wrenches and electric drivers and and save down time. Not for use with powered or impact tools (Ask for Imada Cedar DI-1M Digital Torque Tester).
Kit Contents
- Display
- Sensor
- Sensor Cable and AC Adapter/Charger, the unit runs on internal rechargeable batteries
- 3 Point Calibration Certificate Traceable to NIST
|  |
Features
- Supplied with NIST Traceable Calibration Cert
- ISO-17025 Calibration Certificate Optional
- Accuracy: 0.5% F.S. 1 LSD (32 to 100F)
- Programmable High/Low setpoints with GO/NO GO LED indicators and audible beep
- Peak, Real Time and Peak Down measuring modes (selectable)
- Selectable units lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m
- 800 data memory for recall or for SPC download
- USBvirtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
- Statistics: number of readings, Max, Min, Avg
- Measures torque in both clockwise and counterclockwise directions
- Runs on internal NiCad batteries (8 hour use)
Ranges
| Model | Drive Size | Capacity | Resolution | | DIR-IP5 | 1/4" | 44.00 lb-in
50.00 kgf-cm
500.0 N-cm
5.000 | 0.01 lb-in
0.01 kgf-cm
0.1 N-cm
0.001 N-m | | DIR-IP50 | 3/8" | 440.0 lb-in
500.0 kgf-cm
5000 N-cm
50.00 | 0.1 lb-in
0.1 kgf-cm
1 N-cm
0.01 N-m | | DIR-IP200 | 1/2" | 1700 lb-in
140.0 lb-ft
20.00 kgf-m
200.0 N-m | 1 lb-in
0.1 lb-ft
0.01 kgf-m
0.1 N-m | | DIR-IP500 | 3/4" | 4400 lb-in
360.0 lb-ft
50.00 kgf-m
500.0 N-m | 1 lb-in
0.1 lb-ft
0.01 kgf-m
0.1 N-m | | DIR-IPS05C | 3/4" | 4.400 lb-in
5.000 kgf-cm
50.000 N-cm
X N-m | 0.001 lb-in
0.001 kgf-cm
0.01 N-cm
X N-m | | DIR-IPS5C | 3/4" | 44.00 lb-in
50.00 kgf-cm
X N-cm
5.000 N-m | 0.01 lb-in
0.01 kgf-cm
X N-cm
0.001 N-m | | DIR-IPS20C | 3/4" | 170.0 lb-in
200.0 kgf-cm
X N-cm
20.00 N-m | 0.1 lb-in
0.1 kgf-cm
X N-cm
0.01 N-m |
Related Products
Imada SW-1SV-USB Data Acquisition Software for Torque - The Imada SW-1SV-USB Data Acquisition Software for Torque is a highly customized Excel spreadsheet specifically designed for capturing and analyzing peak and first peak data from torque testers with either RS-232 or USB ports. The Imada SW-1SV-USB Data Acquisition Software for Torque captures peak torque or first peak readings and provides a running log of all torque measurements along with a chart of the data as well as statistical information including Min, Max, Mean, Median, Standard Deviation, Average Deviation and Variance.
|  |
Imada Cedar DI-1M Digital Torque Tester - Imada Cedar DI-1M torque testers are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power driver. These fast response Imada Cedar DI-1M give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of 0.5%, 1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable.
|  |
|
|
|
