Force and Torque Measurement Instruments

AWS TT-QC / AWS-QC Digital Torque Tester

AWS TT-QC / AWS-QC Digital Torque Tester -Bench Mount Digital Torque Tester for manual and power torque screwdrivers and wrenchesIdeal for in-house testing and calibration of torque toolsAvailable in 15 different measuring rangesEight selectable engineering units: oz-in, lb-in, lb-ft, N-m, cN-m, Kgf-cm, gf-cm, Kgf-m

The AWS TT-QC / AWS-QC Digital Torque Tester is a simple bench mount digital torque tester for quick tool verification. Our smallest and lowest cost bench mount torque tester to date, the AWS TT-QC / AWS-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metro logy grade tester. A unique rotating display (optional) and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations, and make switching between the two modes almost effortless. It is ideal for switching between pistol grip and inline tool checking. The AWS TT-QC / AWS-QC Digital Torque Tester takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.

Please click on the links below for additional information on the models available for this product:

DTL-50i, DTL-100i and DTL-175i Low Range Digital Torque Wrenches

Checkline DTL Low Range Digital Torque Wrench1/4" Digital Torque Wrench3 Ranges, Up to 177 lb-in / 20 Nm capacityCompact design for low-torque, limited access applications

The Check-Line DTL Digital Torque Wrench is designed for simple and precise measurement of industrial, automotive, aerospace and many other applications. It measures both application or remove torque and displays it in either Real-Time or Peak Mode on a large LCD display in Lb-in, N-m, ft-lb or Kg-cm units (user selectable). The DTL features a programmabletarget set point that indicates the desired torque value with a red and green LEDs and audible beep.

Please click on the links below for additional information on the models available for this product:

Checkline TSD Torque Screwdriver

Checkline TSD Digital Torque Screwdriver3 Ranges, Up to 35 lbf-in capacityUnits of measure: lb-in, kg-cm, cN-m

The new Check-Line TSD manual torque measuring screwdriver is designed for accurate measurement of application and removal torque of screws and fasteners. An LCD display measures bi-directional torque in real-time or peak modes.The TSD has an accuracy of 2.5%* F.S and has 9 programmable setpoints that provide both an audible beep and green/red LED indicator for precision torque application.

Please click on the links below for additional information on the models available for this product:

Gedore EMT - QSA - QSN Adjustable Torque Screwdriver - Ergo Quickset Adjustable

Gedore EMT - QSA - QSN Adjustable Torque Screwdriver - Ergo Quickset AdjustableTorque Limiting Screwdriver for ProductionThe bi-directional cam slips free once the set torque has been reached making over-tightening impossible.Micrometer adjustment allows for accurate tool setting.

The Gedore EMT - QSA - QSN Adjustable Torque Screwdriver - Ergo Quickset Adjustable is a designed to apply a set amount of torque. A bi-directional cam slips free once the set torque has been reached making over-tightening impossible.

Please click on the links below for additional information on the models available for this product:

Mountz TBIH Break-Over Torque Wrench with Interchangeable Head

Mountz TBIH Break-Over Torque Wrench with Interchangeable HeadInterchangeable headsTorque Ranges: 25 ozf.in - 50 lbf.in

The Mountz TBIH Break-Over Torque Wrench with Interchangeable Head is a small torque wrench ideal for applications with limited space. The flexible preset wrench can adapt to different fastening applications as it is compatible with different head options like open end, box end, flare end, hex key end or a ratchet head. The slim wrench features a tamper-proof internal adjustment. When the TBIH torque wrench achieves torque, the head breaks-over signaling to the operator to stop applying torque to the fastener or bolt. Break-over torque wrenches improve control of the fastening process by reducing the risk of both over and under tightening.

Please click on the links below for additional information on the models available for this product:

AWS RDF Rundown Fixture - Joint Simulators for Torque Testers

AWS RDF Run Down Fixture - Joint Simulators for Torque TestersRequired for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic)Manufacturer: AWSWarranty: One Year

The AWS RDF Standard Rundown Fixture - Joint Simulators for Torque Testers is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The AWS RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.

Please click on the links below for additional information on the models available for this product:

Seekonk SK Cam-Over Torque Wrench

Seekonk SK Cam-Over Torque WrenchCapacity: up to 90 lb-ft1/4, 3/8 or 1/2 Inch Drives

The Seekonk SK is designed for fool proof versatility in a convenient configuration. As with our other slip type tools, over torquing is impossible even with continued turning. The unmatched performance and endurance exhibited by these tools are made possible by internal components produced on state of the art CNC machining centers. The Seekonk SK Cam-Over Torque Wrench are pre-set at the factory to your requirements. Under normal use, yearly calibration is sufficient, however; routine calibration checks on a torque analyzer would be considered prudent. Standard accuracy +/- 4%.

Please click on the links below for additional information on the models available for this product:

Checkline DTW Electronic Torque Wrench

Checkline DTW Electronic Torque Wrench1/4" 3/8", 1/2" or 3/4" DriveCapacity: up to 625 lbf-ft / 850 N-m

The Checkline DTW Electronic Torque Wrench is designed for simple and precise measurement of industrial, automotive, aerospace and many other applications. The DTW displays Real-Time and Peak torque on a large LCD display in ft-lb, in-lb or N-m, user selectable. The Checkline DTW features High-Lo set points that indicate a desired torque value with a bright LED and audible beep.

Please click on the links below for additional information on the models available for this product:

Mark-10 Eye End Adapters

Prevent Grip RotationQuick grip installation and removalMount to common load cells, test frames, and force gaugesIndividual adapters and kits available

The Mark-10 Eye End is an adapter that provides a commonly accepted industry method of attaching fixtures to load cells and test frames. They prevent grip rotation and allow for quick removal and installation.

Please click on the links below for additional information on the models available for this product:

Imada Cedar DID Digital Torque Screwdriver

Imada Cedar DID Digital Torque Screwdriver35 lbf-in & 4.5 lbf-in CapacitiesUnits of measure: lb-in, oz-in, kg-cm, N-cm and N-m

The Imada Cedar DID Digital Torque Screwdriver is a torque measuring manual screw driver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software. The Imada Cedar DID Digital Torque Screwdriver is a Torque Screwdriver that has an accuracy of +/- 0.5% F.S., +/-1 LSD and has programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Built-in ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.The Imada Cedar DID substantially reduces scrap and rework costs by eliminating over and undertightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.

Please click on the links below for additional information on the models available for this product: